Skip to content

Hosted Control Plane and tenant networkingΒΆ

Official documentation: Net yet available

Tested with:

Component Version
OpenShift v4.21.9
OpenShift Virt v4.21.0

OverviewΒΆ

Challenge: running an hosted cluster with in different tenant network segment/vlan without widely open access from tenant segment to managment segment.

Addtional requirement, the hub cluster should not have any address or network connection into the tenant network segment. It's only allowed to place virtual machines into the network segment.

The worker nodes of the hosted cluster are quite easy to solve, just connected them into the tenant network segment (import, DHCP is required).

The hosted control plane compontents to expose into tenant network segment is more challenging. Following components have to concider:

  • API Server
  • OAuth
  • Konnectivity
  • Ignition

Here an list of possible exposing options for these components:

Component/Service Exposing strategy (servicePublishingStrategy) Kubernetes Service type LoadBalancer Ingress/Route
API Server
  • LoadBalancer (Recommended, K8s Service Type Load Balancer)
  • NodePort* (not for production)
    		•  βœ… ❌
    OAuth
  • Route/Ingress (default)
  • NodePort* (not for production)
    		•  ❌ βœ…
    Konnectivity
  • Route/Ingress (default)
  • LoadBalancer (K8s Service Type Load Balancer)
  • NodePort* (not for production)
    		•  βœ… βœ…
    Ignition
  • Route/Ingress (default)
  • NodePort* (not for production)
    		•  βœ… ❌

    For our proof of concept we want to try following, exposing the components via:

    • API Server: LoadBalancer
    • OAuth: Router/Ingress: via a dedicted router shard.
    • Konnectivity: via a dedicted router shard.
    • Ignition: via a dedicted router shard.

    Exposing compontents via router/ingress shardΒΆ

    The idea with the dedicated router/ingress shared is to expose the router/ingress shard into the tenant network segment and only for the hosted cluster components.

    In front of the router/ingress shared is an external load balancer (for example, f5 bigip, netscaler,..) with access into the managment network segment and expose the router shared into the tenant network segment.

    Proof of concept envrioment overviewΒΆ

    Router between Mgmt and Tenant-AΒΆ

    VyOS Router router & firewall. Do not allow Traffic between Mgmt and Tenant-A network except DNS and gateway.

    VyOS config commands 
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
    set firewall group address-group ALLOWED-IPS address '10.32.96.1'
set firewall group address-group ALLOWED-IPS address '10.32.96.31'
set firewall group address-group ALLOWED-IPS address '10.32.111.254'
set firewall ipv4 forward filter rule 49 action 'accept'
set firewall ipv4 forward filter rule 49 description 'Allow IPs'
set firewall ipv4 forward filter rule 49 destination group address-group 'ALLOWED-IPS'
set firewall ipv4 forward filter rule 50 action 'drop'
set firewall ipv4 forward filter rule 50 description 'Drop enire coe lab'
set firewall ipv4 forward filter rule 50 destination address '10.32.96.0/20'

set interfaces ethernet eth0 address 'dhcp'
set interfaces ethernet eth1 address '192.168.203.1/24'

set nat source rule 100 outbound-interface name 'eth0'
set nat source rule 100 source address '192.168.203.0/24'
set nat source rule 100 translation address 'masquerade'
set service dhcp-server listen-interface 'eth1'
set service dhcp-server shared-network-name coe-2003 authoritative
set service dhcp-server shared-network-name coe-2003 subnet 192.168.203.0/24 option default-router '192.168.203.1'
set service dhcp-server shared-network-name coe-2003 subnet 192.168.203.0/24 option name-server '10.32.96.1'
set service dhcp-server shared-network-name coe-2003 subnet 192.168.203.0/24 range 1 start '192.168.203.100'
set service dhcp-server shared-network-name coe-2003 subnet 192.168.203.0/24 range 1 stop '192.168.203.200'
set service dhcp-server shared-network-name coe-2003 subnet 192.168.203.0/24 subnet-id '1'
set service ssh
set system host-name 'router-2003'
set system name-server '10.32.96.1'
set system name-server '10.32.96.31'

    Ingress ShardingΒΆ

    Ingress Controller 
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
    apiVersion: operator.openshift.io/v1
kind: IngressController
metadata:
  name: tenant-a
  namespace: openshift-ingress-operator
spec:
  domain: tenant-a.coe.muc.redhat.com

  endpointPublishingStrategy:
    type: NodePortService
  namespaceSelector:
    matchExpressions:
      - key: kubernetes.io/metadata.name
        operator: In
        values:
          - ingress-test
          - clusters-tenant-a

    1
2
3
    % oc get svc -n openshift-ingress router-nodeport-tenant-a
NAME                       TYPE       CLUSTER-IP       EXTERNAL-IP   PORT(S)                                     AGE
router-nodeport-tenant-a   NodePort   172.30.141.209   <none>        80:32460/TCP,443:32488/TCP,1936:32095/TCP   106s

    Ingress sharding load balancer is an RHEL 9 system with haproxy.

    • Install HAProxy dnf install haproxy
    • Configure selinux setsebool -P haproxy_connect_any 1
    • Apply Example haproxy.conf (don't forget to update ports)
    • Enabel and start haproxy systemctl enable --now haproxy
    HAProxy config 
     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
    global
  log         127.0.0.1 local2
  pidfile     /var/run/haproxy.pid
  maxconn     4000
  daemon
defaults
  mode                    http
  log                     global
  option                  dontlognull
  option http-server-close
  option                  redispatch
  retries                 3
  timeout http-request    10s
  timeout queue           1m
  timeout connect         10s
  timeout client          1m
  timeout server          1m
  timeout http-keep-alive 10s
  timeout check           10s
  maxconn                 3000

listen ingress-router-443
  bind *:443
  mode tcp
  balance source
  server ucs-blade-server-5 10.32.96.105:32488 check inter 1s
  server ucs-blade-server-6 10.32.96.106:32488 check inter 1s        
  server ucs-blade-server-7 10.32.96.107:32488 check inter 1s
  server ucs-blade-server-8 10.32.96.108:32488 check inter 1s

listen ingress-router-80
  bind *:80
  mode tcp
  balance source
  server ucs-blade-server-5 10.32.96.105:32460 check inter 1s
  server ucs-blade-server-6 10.32.96.106:32460 check inter 1s        
  server ucs-blade-server-7 10.32.96.107:32460 check inter 1s
  server ucs-blade-server-8 10.32.96.108:32460 check inter 1s

    Add DNS Records

    1
2
3
    konnectivity.tenant-a.coe.muc.redhat.com.       IN A 192.168.203.111
oauth.tenant-a.coe.muc.redhat.com.              IN A 192.168.203.111
ignition.tenant-a.coe.muc.redhat.com.           IN A 192.168.203.111

     1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
    apiVersion: project.openshift.io/v1
kind: Project
metadata:
  name: 'clusters'
---
apiVersion: hypershift.openshift.io/v1beta1
kind: HostedCluster
metadata:
  name: 'tenant-a'
  namespace: 'clusters'
  labels:
    "cluster.open-cluster-management.io/clusterset": 'default'
spec:
  configuration:
    ingress:
      appsDomain: apps.tenant-a.coe.muc.redhat.com
      domain: ''
      loadBalancer:
        platform:
          type: ''
  channel: fast-4.21
  etcd:
    managed:
      storage:
        persistentVolume:
          size: 8Gi
        type: PersistentVolume
    managementType: Managed
  release:
    image: quay.io/openshift-release-dev/ocp-release:4.21.11-multi
  pullSecret:
    name: pullsecret-cluster-tenant-a
  sshKey:
    name: sshkey-cluster-tenant-a
  networking:
    clusterNetwork:
      - cidr: 10.132.0.0/14
    serviceNetwork:
      - cidr: 172.31.0.0/16
    networkType: OVNKubernetes
  controllerAvailabilityPolicy: SingleReplica
  infrastructureAvailabilityPolicy: SingleReplica
  platform:
    type: KubeVirt
    kubevirt:
      baseDomainPassthrough: false
  infraID: 'tenant-a'
  services:
    - service: APIServer
      servicePublishingStrategy:
        type: LoadBalancer
        loadBalancer:
          hostname: api.tenant-a.coe.muc.redhat.com
    - service: OAuthServer
      servicePublishingStrategy:
        type: Route
        route:
          hostname: oauth.tenant-a.coe.muc.redhat.com
    - service: OIDC
      servicePublishingStrategy:
        type: Route
    - service: Konnectivity
      servicePublishingStrategy:
        type: Route
        route:
          hostname: konnectivity.tenant-a.coe.muc.redhat.com
    - service: Ignition
      servicePublishingStrategy:
        type: Route
        route:
          hostname: ignition.tenant-a.coe.muc.redhat.com
---
apiVersion: hypershift.openshift.io/v1beta1
kind: NodePool
metadata:
  name: 'tenant-a'
  namespace: 'clusters'
spec:
  arch: amd64
  clusterName: 'tenant-a'
  replicas: 2
  management:
    autoRepair: false
    upgradeType: Replace
  platform:
    type: KubeVirt
    kubevirt:
      compute:
        cores: 2
        memory: 8Gi
      rootVolume:
        type: Persistent
        persistent:
          size: 32Gi
      additionalNetworks:
      - name: default/cudn-localnet1-2003
      attachDefaultNetwork: false
  release:
    image: quay.io/openshift-release-dev/ocp-release:4.21.11-multi
    2026-05-01 2026-05-01 Contributors: Robert Bohne